The SGM A4 Artnet-DMX Converter enables Artnet-DMX control of up to four DMX universes, or up to 20 DMX universes when (a maximum of) up to fve A4s are daisy-chained together using the Artnet input and output sockets.
The A4 can operate on 100-240 V, 50/60 Hz mains supplies. A 1-meter (3.3 ft) long power cable is hard wired to the unit; do not open the unit to replace this. The power cable may be ftted with a power cord cap (not supplied). For permanent installation, have a qualifed electrician wire the mains cable directly to a suitable branch circuit.
PHYSICAL
|
|
Length x depth x height
|
116 x 94 x 65 mm (4.6 x 3.7 x 2.6 in.)
|
Weight
|
862 grams (30 ounces)
|
CONSTRUCTION
|
|
Housing
|
Steel
|
INSTALLATION
|
|
Orientation
|
Any
|
OPERATING CONDITIONS
|
|
Ambient temperature range (Ta)
|
-10° to 40° C (14° to 104° F)
|
Maximum relative humidity
|
98%
|
PROGRAMMING AND CONTROL
|
|
Control interface
|
Artnet/USITT DMX 512-A
|
DMX universes
|
4
|
Daisy-chaining to other A4 units
|
Maximum of 5 units on one chain
|
Configuration
|
Using SGM Artnet-DMX Confgurator software
|
CONNECTIONS
|
|
Artnet
|
RJ-45 input & output
|
DMX
|
Four 5-pin DMX outputs
|
POWER SUPPLY ELECTRICAL
|
|
AC mains power in
|
100-240 V AC, 2-wire, + PE 50/60 Hz
|
Supplied cable length
|
1 meter (3.3 ft)
|
Current
|
0.15-0.08
|
Power
|
10 W
|
|
|