The ILD is an Artnet pixel driver that can be used to drive six SGM LT-100s, three SGM LT-200 or 168 SGM LED Ball pixel luminaires. Up to five ILDs can be configured and controlled when daisy-chained together and connected to a computer using an Ethernet cable, and up to five ILD’s per port can be daisy-chained when one or more Ethernet switches are used. Unpack the device and inspect it to ensure that it has not been damaged in transport.
The fixture is not designed for permanent outdoor installation, but it is IP65-rated. This means that it is protected from:
• Dust, to the degree that there is no ingress of dust.
• Lower pressure jets of water from any direction.
PHYSICAL
|
|
Length x depth x height
|
299 x 116 x 65 mm (11.8 x 4.6 x 2.6 in.)
|
CONSTRUCTION
|
|
Housing
|
Steel
|
Finish
|
Black
|
INSTALLATION
|
|
Orientation
|
Any
|
AMBIENT OPERATING CONDITIONS
|
|
Maximum ambient temperature (Ta)
|
40° C (104° F)
|
Minimum ambient temperature (Ta)
|
-10° C (14° F)
|
Operating humidity
|
100%
|
IP rating
|
IP 65
|
PROGRAMMING AND CONTROL
|
|
Configuration
|
via PC running SGM Artnet Configurator
|
Control of attached LED pixels
|
via Artnet with three DMX channels per LED pixel
|
Software upgrade
|
via PC running SGM Artnet Configurator
|
Wireless interface
|
via RFID using an Android telephone that has NFC support and SGM Tools app
|
CONNECTIONS
|
|
Artnet data input
|
RJ-45 female socket
|
Artnet data output
|
RJ-45 female socket
|
Pixel luminaire connections
|
Six threaded screws, compatible with SGM LT-100, LT-200 and LED Balls
|
ELECTRICAL
|
|
AC power
|
100–240 V, 50/60 Hz
|
Maximum total power consumption
|
150 W
|